Metagenomic analysis of automotive metalworking fluids from three different manufacturing facilities
DOI:
https://doi.org/10.33043/pxrws9g6kshKeywords:
Metagenomics, Mycobacteria, Metalworking fluids, PseudomonasAbstract
Metalworking fluids are used in metal machining and cutting as lubricants and coolants, and sometimes for their anti-corrosion properties. Metalworking fluids are commonly used in automotive manufacturing plants where potential contamination by bacteria poses public health concern. This study was conducted to evaluate the usefulness of metagenomics in determining the identity of bacteria and the diversity and richness of microbial communities in metalworking fluids. Five metalworking fluid samples from three different plants, located in two different U.S. states, were obtained. A protocol was optimized to isolate DNA from metalworking fluids. A metagenomic analysis was performed by sequencing the 16S rRNA V3-V4 regions. Microbial communities were analyzed and the diversity and richness of the samples were determined. Genera such as Mycobacterium and Pseudomonas were relatively abundant in samples from some plants, whereas other genera such as Comamonas and Acinetobacter were more abundant in other samples. All five samples were found to have bacterial communities that included opportunistic pathogens, emphasizing the importance of surveillance and treatment of metalworking fluids as important steps in addressing potential public health concern for automotive manufacturing workers.
Downloads
References
Kapoor, R., Selvaraju, S. B., Subramanian, V., & Yadav, J. S. (2024). Microbial community establishment, succession, and temporal dynamics in an industrial semi-synthetic metalworking fluid operation: A 50-week real-time tracking. Microorganisms, 12(2), 267. https://doi.org/10.1002/(SICI)1097-0274(199710)32:4%3C423::AID-AJIM16%3E3.0.CO;2-5
Wu, J., Franzblau, A., & Xi, C. (2016). Molecular characterization of microbial communities and quantification of Mycobacterium immunogenum in metal removal fluids and their associated biofilms. Environmental Science and Pollution Research, 23(5), 4086–4094. https://doi.org/10.1007/s11356-015-4476-9
Thompson, I.P., & van der Gast, C.J. (2010). The Microbiology of Metal Working Fluids. In: Timmis, K.N. (eds) Handbook of Hydrocarbon and Lipid Microbiology. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-77587-4_173
Wallace, R.J. Jr, Zhang, Y., Wilson, R.W., Mann, L., & Rossmoore, H. (2002). Presence of a single genotype of the newly described species Mycobacterium immunogenum in industrial metalworking fluids associated with hypersensitivity pneumonitis. Applied and Environmental Microbiology 68(11), 5580-5584. https://doi.org/10.1128/AEM.68.11.5580-5584.2002
Kreiss, K., & Cox-Ganswer, J. (1997). Metalworking fluid-associated hypersensitivity pneumonitis: a workshop summary. American Journal of Industrial Medicine 32(4), 423-432. https://doi.org/10.1002/(SICI)1097-0274(199710)32:4%3C423::AID-AJIM16%3E3.0.CO;2-5
Eisen, E.A., Smith, T.J., Kriebel, D., Woskie, S.R., Myers, D.J., Kennedy, S.M., Shalat, S., & Monson, R.R. (2001). Respiratory health of automobile workers and exposures to metal-working fluid aerosols: lung spirometry. American Journal of Industrial Medicine 39(5), 443-453. https://doi.org/10.1002/ajim.1038
Navgire, G.S., Goel, N., Sawhney, G., Sharma, M., Kaushik, P., Mohanta, Y.K., Mohanta, T.K., & Al-Harrasi, A. (2022). Analysis and interpretation of metagenomics data: an approach. Biological Procedures Online 24, 18. https://doi.org/10.1186/s12575-022-00179-7
Elansky, S.N, Chudinova, E.M., Elansky, A.S., Kah, M.O., Sandzhieva, D.A., Mukabenova, B.A., & Dedov, A.G. (2022). Microorganisms in spent water-miscible metalworking fluids as a resource of strains for their disposal. Journal of Cleaner Production 350, 1-9. https://doi.org/10.1016/j.jclepro.2022.131438
Shen, Y., Zhang, W., Wu, L., Dong, Y., Guo, G., Dong, L., & Guo, Z. (2025). Microbial proliferation deteriorates the corrosion inhibition capability, lubricity, and stability of cutting fluid. Frontiers in Microbiology16, 1522265. doi: 10.3389/fmicb.2025.1522265
Di Maiuta, N., Rüfenacht, A. & Küenzi, P. (2017). Assessment of bacteria and archaea in metalworking fluids using massive parallel 16S rRNA gene tag sequencing. Letters in Applied Microbiology 65, 266-273. https://doi.org/10.1111/lam.12782
Hall, M., & Beiko, R.G. (2018). 16S rRNA Gene Analysis with QIIME2. Methods in Molecular Biology 1849, 113-129. https://doi.org/10.1007/978-1-4939-8728-3_8
Callahan, B.J., McMurdie, P.J., Rosen, M.J., Han, A.W., Johnson, A.A., & Holmes, S.P. (2016). DADA2: High-resolution sample inference from Illumina amplicon data. Nature Methods 13(7), 581-583. https://doi.org/10.1038/nmeth.3869.
Thukral A. K. (2011). A review on measurement of Alpha diversity in biology. Agricultural Research Journal 54(1), 1. https://doi.org/10.5958/2395-146X.2017.00001.1
Lozupone, C., & Knight, R. (2005). UniFrac: a new phylogenetic method for comparing microbial communities. Applied and Environmental Microbiology 71(12), 8228-8235. https://doi.org/10.1128/AEM.71.12.8228-8235.2005
Murat, J., Grenouillet, F., Reboux, G., Penven, E., Batchili, A., Dalphin, J., Thaon, I., & Millon, L. (2012). Factors influencing the microbial composition of metalworking fluids and potential implications for machine operator’s lung. Applied and Environmental Microbiology 78(1). https://doi.org/10.1128/AEM.06230-11
Liu, H-M., Lin, Y-H., & Lin, W-H. (2010). Occurrence and characterization of culturable bacteria and fungi in metalworking environments. Aerobiologia 26, 339-350. https://doi.org/10.1007/s10453-010-9169-8
Saha, R., & Donofrio, R.S. (2012). The microbiology of metalworking fluids. Applied Environmental Biotechnology 94(5), 1119-1130. https://doi.org/10.1007/s00253-012-4055-7
Ormeño-Orrillo, E., Servín-Garcidueñas, L.E., Rogel, M.A., González, V., Peralta, H., Mora, J., Martínez-Romero, J., & Martínez-Romero, E. (2015). Taxonomy of rhizobia and agrobacteria from the Rhizobiaceae family in light of genomics. Systematic and Applied Microbiology 38 (4), 287-291. https://doi.org/10.1016/j.syapm.2014.12.002
Wu, Y., Zaiden, N., & Cao, B. (2018). The core- and pan-genomic analyses of the genus Comamonas: from environmental adaptation to potential virulence. Frontiers in Microbiology, 9, 3096. https://doi.org/10.3389/fmicb.2018.03096
Lin, J. N., Lai, C. H., Yang, C. H., & Huang, Y. H. (2019). Elizabethkingia infections in humans: from genomics to clinics. Microorganisms, 7(9), 295. https://doi.org/10.3390/microorganisms7090295
Salmeen, I., Brown, J.A. Jr., Foxall-VanAken, S., & Olsen, R.H. (1987). Presence of Acinetobacter species among the predominant bacteria found in a contaminated metal-working fluid. Tribology International 20(4), 218-221. http://dx.doi.org/10.1016/0301-679X(87)90077-6
Perkins, S.D., & Angenent, L.T. (2010). Potential pathogenic bacteria in metalworking fluids and aerosols from a machining facility. FEMS Microbiology Ecology 74, 643-654. https://doi.org/10.1111/j.1574-6941.2010.00976.x
Ahuatzin-Flores, O.E., Torres, E., & Chávez-Bravo, E. (2024). Acinetobacter baumannii, a multidrug-resistant opportunistic pathogen in new habitats: a systematic review. Microorganisms 12, 644. https://doi.org/10.3390/microorganisms12040644
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Christian Chauret, Haley McDaniel
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
By submitting to Fine Focus, the author(s) agree to the terms of the Author Agreement. Beginning in Fall 2018, all authors retain copyrights associated with their article contributions and agree to make such contributions available under a Creative Commons Attribution-NonCommercial 4.0 International license upon publication in Fine Focus. Copyrights to articles published prior to Fall 2018 have been transferred from the authors to Fine Focus.
